Megger MIT300 系列 MIT300 MIT310 MIT310A MIT320 MIT330 兆欧表 绝缘测试仪, 999mΩ, 1000V dc
MIT310 和 MIT320 测试仪结合了双固态显示器,可同时以数字式显示和以移动的图形式指针显示测试结果,准确地仿真模拟表。
所有测试仪都带有完整的校准证书。对于偏好模拟设备的用户,Megger 提供了MIT310A,它的功能类似 MIT310,但其传统的移动式线圈取代了数字显示。
Megger MIT300 系列 MIT300 MIT310 MIT310A MIT320 MIT330 兆欧表 绝缘测试仪, 999mΩ, 1000V dc
MIT300 系列 MI所有新系列的仪器都可显示绝缘电阻至 999MΩ,连续性测试 200 mA,
一个快速反应的连续性蜂鸣器,以及將测试导线的电阻调零的功能。入门级的
MIT300 绝缘测试电压为 250 V 和 500 V, 其余各型号则允许测试电压为 250 V、
500 V 和 1000 VT300 MIT310 MIT310A MIT320 MIT330兆欧表 数字/模拟绝缘和连续性测试仪
Megger MIT40X 兆欧表 绝缘测试仪,
MIT40X提供了一种的绝缘测试电压方案。MIT40X能够将测试电压设置为10V到100V之间的值,步进值为1V,可在“Set-Up”菜单中选择。
MIT40X
特殊场合测试
典型的应用包括:
民用航空测试
军事海陆空通信系统测试
生产线测试
静电测试
元件测试
电池驱动的牵引设备和电梯测试
MIT2500系列 MIT2500 2500V兆欧表 绝缘电阻测试仪,
The MIT2500 insulation and continuity tester has been designed forElectrical and Industrial test applications, where operation voltages
exceed 1000 V and higher insulation test voltages are needed.The MIT2500 offers both fixed range voltages of 50 V, 100V,250 V, 500 V, 1000 V and 2500 V, as well as a variable range thatallows any voltage between 50 V and 2500 V to be “dialled in”.
This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test.
The MIT2500 uses the redesigned case, back-stand, and 6 cellbattery compartment, as well as incorporating a Guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages.
All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating